They are inexpensive, and it avoids the inconvenience of placing a second order later.. As we charge a flat delivery fee regardless of the size of your order, and these are very small parts, it is also a good time to stock up on any bags, filters, service boxes or accessories you might need.

It doesn’t matter if you think it “looks OK” – if the bristles have worn or softened over time, the onboard computer senses that there isn’t enough resistance between the brushroll and the floor and the height adjustment won’t work properly.If your Sebo brush roll has white bristles, then it’s always time for a new one as they were discontinued many years ago and it will be too soft or worn by now.. Read this:.

Is Your Sebo Automatic X Vacuum Hard to Push?If you recline the machine and the height adjustment is notchy or there’s a clicking sound from under the machine where the central wheel is, it likely wants a... Something else to look at: take off the top and there’s a magnet.

>>this topic on our forums<<.If it has come out, it will be on the power board somewhere, the PCB under it.

Find it, glue it back in and see if it works now..

The last thing to try would be the power supply board if an X1, X1.1 or X4/5.It isn’t just a case of putting a set of carbon brushes in and hoping for the best.

You would expect to need to change at least one of the bearings at the same time if you’re going to rebuild a Sebo vacuum motor.. As with many things, it’s easier to show you than explain it in a post, so for this reason, we have the video below which shows one of our Sebo engineers rebuilding a motor for a customer.. You can click the YouTube button to watch the video on full screen on YouTube..Here are the parts you’ll need: the bearings are.

and the bearing puller is.X1 Lamb carbon brushes are.